How to braid volumetric braid: 10 hairstyles

Send

Weaving firmly entrenched on the fashionable Olympus, along with bulk styling. They are loved by many women around the world, as well as stylists who work with top models and representatives of show business.

These hairstyles look spectacular and sophisticated, give their owner charm and elegance.

Delicate weaving, voluminous and lush, can be an addition to the evening and casual look in a casual style.

Variations of this stylistic decision can be chosen for any type of person. And also with their help, you can adjust the appearance and facial features, emphasizing their softness.

On a note: especially luxuriantly curvy weaving looks on hair with complex coloring. This hairstyle perfectly reveals the beauty of shades of strands.

Volumetric spit at home

Making curls elements of weaving - not an easy task. Weaving complex braids requires certain skills and skills, therefore available to experienced craftsmen.

At home, it is difficult to recreate a hairstyle for several reasons:

difficulties in accessing the entire web of hair,
a large amount of curls is difficult to work out carefully and carefully,
it is quite difficult to master all the techniques of weaving and apply them without relevant experience.

Execution scheme:

Carefully combing the hair, make the radical pile.
Combed strands are laid back and the top layer is gently smoothed.
Three thin strands are separated from the forehead, from which an ordinary pigtail begins to be braided.
After two or three segments, they change the technique - they start picking up strands underneath and loose strands on both sides, continuing to weave the usual three-strand braid.
A braid is dug in such a technique to the very end and tied with an elastic band.
Extreme strands are stretched by hands from each section, forming curls.
The finished volumetric hairstyle is fixed with varnish.

Additional recommendations: To increase the volume, bouffant is done along the entire length of the hair. It is also possible to use a corrugation (an iron with the corresponding nozzle).

Modern volumetric weaving are stylish hairstyles that are perfect for girls with different types of appearance and are combined with a lot of outfits. Lush braids emphasize femininity, sensuality and harmony, as well as soften facial features.

Large French Spit

Raise the hair at the top and stab stealth.
Comb the side strands.
Separate the strand and braid the usual French braid with the gradual addition of new strands to the braid.
Fluff the resulting braid, stretching its segments.

Volumetric braid on the tail

Make the tail on the side.
Separate the top half from it and tie it with a rubber band so that it is slightly lower than the first.
Split the hair between the two rubber bands and push the second half of the tail into the middle, as in a loop.
Tie it so that the third gum was lower than the second.
Form a ring between the rubber bands and push the other half.
Do this over the entire length.
Fluff the braid, strongly pulling parts of the obtained rings.

Greek style braid

Curl the hair and split the curls.
Leave some of the curls on the bottom, and pin the rest on top so as not to interfere.
Separate on a small strand on each side, tie a silicone rubber band and fluff hair over it.
Tie these strands together and fluff the hair between the rubber bands.
To braid in a free braid with the curls remaining below, and again to tie up with a rubber band.
Gradually release the pinned top curls and lay them nicely on the braid, fastening with pins and varnish.
Leave on one side a thin curled fringe.

Royal Fishtail

Grab two small strands at the temple and begin to weave a French fishtail on the side with the addition of new strands.
Every few interlacings, fan the braid, gently and symmetrically pulling thin strands out of the fishtail.
Having advanced to the upper earlobe, the tail should be tied with a thin elastic in the color of the hair.
Divide the lower part of the hair into two halves.
From the half to the far to the already braided fishtail, separate the small strand from the edge and twist it into a cord.
Connect the harness with the second half of the hair.
From the part closest to the braided fishtail, separate the outer strand and transfer it to the other half.
Continuing to weave in this way, form a large "fishtail" along the entire length of the hair, not forgetting to periodically fluff it.

Big fluffy French braid at the side

Comb the hair to the side so that on one side there is much more hair.
In case of insufficient density of hair, you can use overhead strands.
Starting from the temple and moving along the head, braid an ordinary French braid to which you need to add new strands of loose hair.
Spit should be on the side.
Make a spit voluminous, stretching the intertwined strands on the sides.

Spit Bundle

Spray varnish and comb hair, creating volume on top.
Starting behind the ear to do next two small tails.
Divide the extreme tail in half and hold the second tail between its halves.
Tie the ends of the first tail along with the next strand.
Lower the second tail, split the third tail between its halves, tie the ends of the second tail to the next strand, making the fourth tail.
Moving along the neck, form a braid of rubber bands, until the hair runs out.
Then weave along the entire length of the hair.
Stretch the obtained braid in the opposite direction (to the beginning of the weaving).
To fix, to hide the end inside, fluff up the slices.

Ribbon braid

Make a good amount at the crown.
Choose tape, contrasting in color with hair.
Lay the ribbon along the forehead so that the ends are left on both sides - one short and the other long.
Tie the ends of the ribbon under the hair at the base of the neck.
Split hair in half and wrap one half (bottom) with tape.
Then wrap the other half.
Then again the first, the second again and so along the entire length of the hair.
All this is done with a long end, and a short one always remains in the middle between the hair.
Make a braid volumetric, pulling the hair between the rings of the tape.

Romantic volumetric braid of curls

Curl hair curling or using curlers, split curls.
Comb a strand on the top of the head, lift and stab.
The upper part of the curls lay beautifully on the head, pinning the pins.
Of the three small strands, taken from the bottom of the hair, braid the braid.
The remaining hair lay alternately on the braid, fluffing and pinning.

Exquisite volume spit of six strands

Separate small strands from the forehead, comb them and spray with varnish.
Make a smooth side parting and comb the hair to one side.
Divide the hair into three equal parts, close the face strand back and stab.
The remainder of the hair is divided into three strands.
On the third weave, separate the thin strand from the extreme component of the braid and put it aside.

Spit the braid along the entire length, leaving a thin strand from the outer edge.
Dissolve the next part of the hair, periodically leaving strands, as in the first, but only from the inner edge.
Dissolve the last part of the hair, divide it in half and begin to weave a spikelet, throwing alternate thin strands from one half to the other.
From time to time, in the course of weaving, add strands left in previous braids (from the side where the braid is located) into the spike, thus connecting all three braids to each other.
Carefully fluff all three braids so that they appear as one. Curl tip braids and bangs.

Large four-strand volumetric braid

The braid is woven according to the scheme given below.

A thin braid is braided to the side, which will play the role of the fourth strand.
Three more strands are separated next to the scythe (two on one side and one on the other).
A braid of 4 strands is woven, that is, a third (pink) strand (if counted from left to right) is put on the second (green) strand.
Then the first (blue) strand is put on the former third (pink).
Then under the former second (green) you need to put the fourth (yellow) strand.
To do the same actions along the entire length of the braid, not forgetting to add new strands of non-involved hair to the braid at each interlacing along the edges.
Moving down, you need to pull the extreme slices of the braid so that it becomes volumetric and tracery.

Volumetric braids - this is a wonderful tool of beauty, capable of the most ordinary woman to turn into a queen.

We add volume with oblique bangs and without

Braid thick braid manages the easiest way. Even a standard pigtail of three strands can become bulky if you know the rules for pulling curls.

Braid braid and gently secure the ends of the hair, without over-pulling. Start pulling curls. Move from the end of the braid to the beginning of the weave. You can do this consistently in the process of braiding,
Hold the link from which to pull the curl. Pull only the outer strands,
To make the hair look neat, first pull it out a little. If necessary, then pull harder.
Ensure that the axis on which the strands intersect is not destroyed. To do this, you hold the links,
Fix varnish each extended link.

After braiding the entire hairstyle also fix, as it is not as strong as a tight braid.

French hairstyle vice versa: scheme with long hair

All fashionistas are familiar with the French braid. It closely adjoins to the head and its locks are directed inside, to the main mass of hair. The volume beautiful braid is obtained by weaving such an element on the contrary, directing the strands from the head. Visually, this hairstyle looks like a braid lying on the surface of the hair. The weaving scheme for a simple version of the French reverse pigtail is shown below. This hairstyle can be a separate or integral part of a complex styling.

Waterfall: knitting needles are not needed, the main thing is a beautiful pattern

In essence, another kind of French braid, leaving a lot of hair free. The hairstyle will allow you to surprise those around you with a volume luxurious braid and show the beauty of your hair. Easy to perform. Suitable for owners of thin or thin hair, as it gives a volume of loose hair. Looks on wavy hair. How to weave a three-dimensional braid of this type is shown in the diagram.

Weave with a ribbon on medium hair

This type of reverse French braid is suitable for a holiday, but it is also acceptable for everyday wear. The result is a reverse pigtail, but along the axis, the line on which the strands intersect, the tape is missed. This option is very simple hairstyles performed on yourself is not so easy because the tape is twisted and mixed with hair. Constantly monitor the position. Tape fasten under the central strand.

Option spit on its side: add gum

A pigtail is made on its side, which is woven according to the technique with pickups from both sides. You weave standard, but pick up the hair not from the sides, but above and below the head.

Volumetric double braid, the French on the contrary, the French and other elements are obtained in this way.

Russian Spit

The usual Russian braid has always been, is and will remain in fashion. Her hair does not overtighten, so they can relax. This hairstyle is very simple. To do this, take three strands that are interlaced in the classical way. Before weaving complex options, learn to do it. And in order to obtain volumetric braids on medium hair, using this method, after weaving and fixing the hairstyle, the strands are slightly pulled and sent to the sides.

To create such a masterpiece on your head, you need to arm yourself with thin rubber bands, invisible hairpieces, varnish and a comb with a sharp end.

First, the curls are carefully combed. The upper part, or "cap", isolated on the crown and stabbed. The rest is entwined around the head.
From one ear proceed to weave the French braids. In this case, periodically add locks from the stabbed part, and from below continue to work with hair from the loose part. Looks at such a volume braid on medium hair perfectly. After all, by the end of weaving, you will just return to the area from which you started. Thus it will be possible to hide the border of the beginning and end of weaving. These places are slaughtered invisible, and then fixed with varnish. If the tips still protrude, one of them weaves an ordinary braid and hides inside.

French Spit

It is based on the same three strands. Pigtail should be tightly pressed to the head. It can be woven in the shape of a zigzag, wreath or fishtail. French curly hairstyles on medium hair look good from bottom to top. Then they begin to weave from the head. Reaching the top, continue to weave the usual classic braid, which is tucked inside. In addition, from the strands remaining at the top, you can build a bundle and stab it.

The French Zigzag braid looks beautiful too. To do this, bangs pinned and separated part on the right side. Where there is a smaller part of the curls from the parting, begin to weave a braid of three strands. Hair, as usual, in this technique, capture only the top. Weaving on another part, gradually lower and turn in the opposite direction. With the help of this rotation is obtained zigzag. As a result of the weaving, there must be a type of the Latin letter Z. The curls that remain are tied up in a tail, gathered in a bundle or combed and fixed and loose.

Often choose the French weave to create a wedding hairstyle. Having learned this technique, you can easily prepare yourself for various celebrations.

Spike - another volume braid on medium hair. With this hairstyle, the curls do not fall apart, and the fringe retracts into a braid.

Spikelet can be done traditionally: from top to bottom, as well as in the opposite direction. In the latter case, it gives the hair extra volume. Also sometimes used six, eight and twelve strands for weaving. The evening version is made in an unusual way: weaving starts from one side to the side and gradually reaches the ends of the hair from the other side.

Greek braids

Be sure to try and make this unusual hairstyle. It starts with direct parting from the crown to the temples and a little lower. Then weave a spike in different ways:

the hair is picked up along the edge, from the top of the head to the face,
weave a narrow braid from the hair growing around the face without interweaving the main strands.

Finish hair too, in different ways.

They make a crown from one ear to the other, attaching a spikelet to the other ear with invisible beads or a beautiful hairpin. The remaining loose part will give your hair a special charm. Her feature is some carelessness, so the braid looks perfect on curly hair.
Weaving can be done around the head, ending where they started. This hairstyle looks more neat. The remaining tip is hidden under the braid and attached with a barrette.

Fish tail

The hairstyle really reminds a tail of a small fish. It differs in a special way of interweaving the strands, due to which it turns out a chic shiny volume braid on medium hair. She weave for every day, and for special occasions. She literally attracts the eyes of others.

Plait weave tight and add accessories to it. Those who want to get the most voluminous braids for medium hair are recommended to attach special clips to them. It only seems that the creation of such a scythe is an insanely complicated matter. Try this braided bulk braid on medium hair.Schemes will help you to more easily accomplish your plans, and you will not even notice how quickly you will weave a masterpiece.

If there is not much time for weaving braids, you can make a simplified version - a tourniquet. This is a simple and at the same time spectacular hairstyle. It looks volumetric, even if you can not boast of thick hair. Hair do like this:

hair lift and make a ponytail,
divided into two parts
the curl on the right side is twisted to the right side, and the left side - to the left side,
the ends are attached stealth,
then they are twisted,
The tips are secured with a rubber band or barrette.

This volume spit on medium hair after a little practice is done very quickly.

The style of "Boho" today is a real hit and is at the peak of popularity. It does not differ at all accuracy of performance, but it looks very fashionable. For boho is characterized by some negligence and even randomness. Pigtail braided from all hair or from part of the strands. It is made down with a wreath or rim around the head. This braiding of volume braids on medium hair is a real field for the realization of fantasies and experiments.

For example, leather threads woven into braids or bright ribbons, as well as other decorations, look extravagant. To perform the hairstyle, the mousse is applied to the washed hair, then it is wound with a curling iron from the base to the ends. Spinning halves, parting and weaving the usual braid, using additional accessories. Having finished this weaving of volumetric braids on medium hair, separate strands are pulled out of them. This creates a negligent effect.

Hairstyle option "volume braids" (medium hair)

Each of the above types of braids can be performed with additional volume. Consider another elegant styling, which is specifically aimed at creating a volume of hair. With its help, even thin hair looks thick. The effect is achieved with the help of the “openwork weaving” technique. So let's get started.

There are three strands in the area above the forehead.
Perform reverse weaving, in which the side strands lead under the middle.
From the extreme right emit a thin strand and lay, securing invisible.
Further and add locks from the main part, laying under the average. At the same time lay down the thin sides.
Continuing to weave the braid, it is better to stretch the side sections at once, so that later it would be easier to draw openwork.
As a result, throughout the entire braid, loose strands will be obtained.
Of them again perform volumetric pigtail. For this, the two upper ones are joined and divided into three parts.
Performing weaving, each time they pick up loose strands. After that, the upper weave stretch. That turned volumetric braid.
You can leave it going down or steal the tips at the top with stealth. Then you get the look of a beautiful flower from the hair.

Conclusion

These interesting braids can be obtained by paying a little attention to your hair. Feel free to experiment with curls, including all fantasy in the creation process. Weaving in a variety of variations in fashion again. Invent your own style with a hairstyle, and it will not go unnoticed by others!

Volumetric braid options

Volumetric braid can be braided in many ways of weaving:

classical (Russian) braid,
French braid,
Greek braid
braid of harnesses,
spit fish tail,
multi-strand braid, etc.

In addition, the braid can be made from the side, around the head, you can also braid a volumetric braid with a ribbon or with artificial strands, which will give extra thickness to the weave. You can also use the technique of reverse braiding (braid on the contrary), which will be an excellent option for creating a voluminous braid on thin hair.

Some of these types of braids, due to the peculiarities of weaving, are voluminous in themselves, while others, in order to give volume, should be weighed with some nuances taken into account. How and by what scheme it is necessary to weave a volumetric braid, consider below.

How to braid volumetric braid?

Here are some recommendations for weaving volumetric braids:

First of all, you should wash your hair with a balm or conditioner, and then dry thoroughly with a hairdryer or in a natural way.
After that, you need to comb well, and if unruly strands you can use the iron.
It is recommended to use a moisturizing spray for hair. This will prevent electrification and tangling of strands during weaving.
Using one of the techniques of weaving, start weaving a braid, not too tight strands, leaving them more free.
Having fixed the tip of the braid, you should slightly pull out from the side each extreme strand by 3–5 mm (starting from the base of the braid), as if relaxing the weaving.
It is important to make elongated strands more or less the same in height and thickness, so that the hairstyle looks neat and not randomly disheveled.
If necessary, especially if the hair is done on the occasion of the celebration, it is recommended to use hair spray.

Jewelry and accessories for volumetric braids

Having decided to braid a volumetric braid as an evening or festive hairstyle, you should think not only about how to fix it, but also with what accessory to decorate it. Of course, the chosen decoration, first of all, must be in harmony with the outfit and overall style. Depending on this, you can use to decorate the braids:

Photo tutorial volumetric 3d braid

At first it may seem that such an original hairstyle is very difficult, but it is absolutely not so! If you know how to weave the French and classic braid, then this one will work out for you without any problems. So, let's begin.

We will need:

Several hair ties,
Hairbrush,
Hair spray.

First stage:

Divide the hair into three equal in size, strands. We begin to braid the usual braid and stop after each of the three strands was involved.

Second phase:

Further, with each strand we need to leave free on a smaller strand, while continuing to weave. These actions are very similar to the weaving of the French braid, only with the exact opposite. It would be better if someone helps you to keep separated hair so that they do not get confused in the main braid.

The third stage:

From the left hair, we make a more complex pigtail, right on the main braid (detailed weaving can be seen on the video at the end of the article).

Fourth stage:

Secure the resulting 3d braid into one with a rubber band or hair clip. And finally, fix the hair received hairspray. Well, the seemingly complicated braid is ready, and it took quite a bit of time!

Elegant braid from 3d braid

First, pull the entire canvas with an iron or a hairdryer to make it easier for you - smooth, straight hair lends itself much better, and it is also easier to track the direction of each curl through it.
Secondly, if they are very long, it is recommended in the process to periodically moisten the working mass, since the ends will be confused.
Well comb through all the hair and break into 5 equal parts. So which of the halves you start weaving does not matter. For convenience, we propose to act in the same way as indicated in the scheme.
Take 3 parts in your left hand, stretch the outermost one under the one on the right and transfer it over the next one - the one that is central for all 5 strands.
Hold them in a predetermined position, then go to the remaining ones in the right hand: stretch the most extreme one under the neighboring one and transfer it over the central one (for all parts).
Repeat the above steps: stretch the leftmost strand under the next one and position it crosswise over the middle one. Then take the extreme right out from underneath and above the middle one.

3D Spit 3D

Comb your hair and comb it back.
For convenience, you can collect them in the tail.
Divide the hair into 3 parts, begin to weave the usual pigtail: put the left strand on the middle one, then twist the right strand also with the middle one.
After the first weave, separate a small section of hair from each side and fold it to the side, then weave a braid.
With subsequent weaves, you separate the braids from the sides along the strand, and then weave them.
In the same technique, fly the braid to the end and tie it with an elastic band.
Go to the released straps.
Take 3 strands and begin to braid an inverted braid, in which the side strands should be intertwined under the middle one.
Continue to weave, using the released straps as grabs for a new pigtail.
In such a technique dock the braid to the end.
Connect both tips together and tie them up with a rubber band.
Fix varnish, if necessary, use decorative accessories.
Hair is ready!

Multi-strand 3d braid

All hair should be gathered in a high tail at the back of the head and divided into seven identical parts.
Secure the middle of these parts with seven silicone rubber bands. Best of all, if the gum will be multi-colored.
Next, the tail of the strands must be divided into two parts: one has four tails, the other three.
Then the extreme strand of the four must be put on top of the next, then pass under the two strands that remained and attach to the part where there were three tails.
The same actions need to be done on the other side. It becomes clear that only extreme strands take part in weaving.
Hairstyle is fixed with a rubber band. To make the spit more free, you can remove the gum that keeps the tail on the back of your head, which will make it more airy.
At the end of this installation can be fixed varnish.

At the beginning of the scheme, this hairstyle seems complicated and intricate. It is necessary to do all these weaving several times to understand the technique. Those familiar with the technique of "macrame", will learn how to make a 3D braid will be much easier, since it almost completely repeats the principle of such weaving. But people who are not familiar with “macrome” will be easy to get used to.

Stylish braid 3d

Stir the entire mass of hair back, separate the thick horizontal layer from the top, break into 3 equal parts.
Cross the left strand over the middle one, then cross the right one over the one that has now become the middle one (the former left one): the classic beginning of the usual French braid of 3 strands.
After that, lift the side parts upwards and fix them with a clip - they are temporarily not needed.
Now pick up from the free mass of hair (top layer) on a wide strand equal to the one that remained intact - the middle strand in the braid.
Repeat the previous steps again: cross the new right strand over the middle one, then cross the new left one over the middle one.
Here it is important to keep the primary direction: if you started weaving with the left, then each next level also start with the left.
Fix the middle strand in place with a clamp-duck, lift the side ones upwards and leave them there - temporarily they will not be needed.
And those that were previously at the top, release: now they will be working side.
Such a trick will allow you to not be confused in the number of parts and make the weaving as accurate as possible.

French Spit 3D

Using your fingers, take a bunch of hair and divide it into 5 parts.
We count the strands from 1 to 5 from right to left.
We proceed to the direct weaving.
Between 1 and 2 strands insert your index finger and little finger.
Little finger pick 1 strand.
Ring finger stick 2 strand and grab
Now you need to insert the middle and index finger between 3 and 4.
With the help of the middle finger, grab 2 strands, and make an index finger under 4 and grab
Now you need to stretch your right hand to the ends of the hair.
Thus you can straighten hair.
Do the same with the other hand.
Now to the strand between the middle and index finger you need to add another strand.
Now repeat the items with 3-5.
All hair should be in one left hand.
Now repeat 7 point, just add a strand on the other side.
Now weave in a similar way until the hair runs out.

Very beautiful braid 3d

Brush dry, clean hair well. Little nuance- if you
If you want to get a tight braid, then lightly wet your hair with a bottle of water spray.
As you already know, a 5-strand braid originates from the side of the forehead and ends at the ear line. Separate a small part of the hair from the right or left side of the head.
The selected part of the hair is divided into three identical pieces.
After that, you need to put the first strand on the second, then on the third.
Now we need to select the fourth part of the hair on the left side of the resulting pigtail.
After that, we put 4 shreds under the second, and then on top of the third,
as if forming a chess weaving.
Then, at the temporal zone on the right side, we separate another, fifth strand. It is passed under the first and on top of the fourth. Our weaving continues using strands 2,3 and 5.
It is necessary to have a second strand under the third and over the fifth.
With the third one, we extend upwards, and then we separate another part of the hair and
add it to the second. We lower the third strand down. Our weaving will now consist of strands 2,4 and 1.
The fourth shred we lift up. Select a new part of the hair on the right side and put it to the first strand. Then, you need to get the first over the second and thread under the third. 4 strand down. According to this technology, we continue to weave, as long as the length of the hair allows.

Volume braid twist 3d

First you need to carefully comb the hair and throw them on one side.
Then tie the tail with a silicone rubber band. Such gum can be bought in special stores. Take gum matching your hair color, or colorless, and be sure to check if it will tear immediately.
Just above the gum leave an opening for the twist.
Raise the end of the tail and stretch it through the left opening, as if turning the tail. And so you made one element braid twist. Tighten it tighter.
We repeat this manipulation a couple of times, as far as the hair is enough.
To give a spit of originality and volume, you need to pull out the top element in each part of the twist
As a result, you will get a very beautiful and practical braid (photo below).
You can easily add this hairstyle with your own elements to create a unique image. After all, a girl should always be different, and in fact it is thanks to the different styles that individuality can be achieved.

Spikelet 3d

Comb the hair back and separate in the temporal region of one strand on each side, on average, their thickness should be 2.5 cm.
Strands back to the back of the head and cross them.
Holding the resulting weave, select a new strand on one side and cross it over the top strand in the weave.
Next, take a strand on the other side and do the same.
Perform these steps until you reach the lower hairline.
Now the hair is divided into two parts and we take strands from under the tail from one side to the other and continue to weave the braid as before, crossing them between each other.
At the same time, when we take a strand from the left side, after weaving we must combine it with the right side of the hair.
Secure the resulting braid with a rubber band or barrette.

Elegant French braid 3d

Separate the hair from the front and fix it with a small silicone rubber band.
Starting in this way weaving a braid will greatly facilitate your work.
This step is optional, you can skip it and from the very beginning divide this zone into three identical strands that you need to cross and make one binding as if you were braiding a regular pigtail (shift the left strand into the middle and shift the right strand into the middle).
Now we separate two identical strands from two sides (strand 1 and 3).
Right strand (number 3) is shifted over the top to the middle.
Also we put the left strand (number 1) in the middle.
Now we are starting to seize new strands and weave them into a braid.
Separate the thin strand from the total mass of hair to the right and attach it to the rightmost strand No. 2.
Already such a double strand is shifted to the middle through the top.
We repeat the same action on the other hand - we separate a small strand from the total mass of hair on the left and attach it to the left strand, shift it to the middle.
Again we repeat on the right side and weave further adding each time new strands to the border of the hair at the neck.
After you have braided all the hairs on the sides, we braid a usual pigtail, shifting the extreme strands alternately in the middle.
Got a beautiful feminine hairstyle
Gum, which we fixed at the beginning of the strand must be hidden under the hair, or remove it, carefully cut with scissors.
Stretch the pigtail wide by hand.
If the hair is smooth and cushioned smoothly - fix hair hairstyle with hairspray and it will remain for the whole day in its original form.
Near the face, you can straighten small strands, it will give a soft and light hairstyle.
It is beautiful when the pigtail is not braided tightly (so you can weave girls so that the hair does not get in the way), but it has a slightly casual look and separate falling strands near the face.

Volume Spit 3d

Separate a small part of the hair from the face, divide it into three equal strands.
Put the right strand under the center, and then the left under the right (now it has become the center).
Put the left strand under the center and add to it a piece of hair on the left.
Put the right strand under the center and add to it a piece of hair on the right.
Continue to weave braid as described.
Gathering all your hair like this, continue to weave a reverse simple braid (it is woven like an ordinary braid, only the side strands are placed under the middle one).
Secure the end with an elastic band.
Stretch strands in a spit to add volume.

Openwork Spit 3d

At the crown, select the bundle of hair.
On the right side, the hair at a similar level cross with the central strand.
On the left side, do the same.
When you cross the center strand with the side straps, slightly loosen the fingers with which the strands are held, you pull out the strand woven to the right.
Pull it up to the formation of a gap between the strands on the right and in the center about the size of your finger.
Leave a lumen, pull the hair a little more, just at the edge of the right strand.
One open loop is ready.
Similarly, pull out the left strand.
Then again add strands on both sides, as in classical weaving.
Stop, and repeat the action, in turn pulling strands.
Weave and pull openwork loops to the end.
Spread them with your fingers so that they are identical and look neat.
Finishing weaving, secure the hair with a rubber band.

3d braid per turn

Before weaving a French braid, on the contrary, you need to prepare your hair.
They should be clean, combed out and slightly damp.
You can additionally apply air conditioning.
First you should choose the place where the spit started.
As already mentioned, it can be positioned in different directions, starting from the top of the head, from the back of the head, from the temple, etc.
It all depends on the desired end result.
We select a wide curl and divide it into 3 strands.
The far left is under the middle one.
Now it becomes central.
Do the same with the extreme curl on the right.
Next, go back to the left curl, drag it under the bottom of the middle one, assemble the whole structure in one hand, free separate the thin strand from the unused hair and connect it with the central one.
We do the same with the right curl.
Alternately weaving loose strands on both sides, we form a braid along the entire length.